1) SEGGER J-Link GDB Server takes an elf file and flashes the target device.
2) J-Flash takes a hex file generated from the elf file and flashes the target device.
J-Flash verifies the (1) scenario as a different checksum than if it were to flash the hex file itself. Similarly, GDB will compare and reflash if the J-Flash hex file (2) had been flashed previously.
How can I find the differences?
A bit about the hardware platform: It has a bootloader and application binaries. The application has access to the SDRAM and NOR flash expansions. The init for NORFLASH has been scripted for both GDB and J-Flash.
Cheers,
Joe
2) J-Flash takes a hex file generated from the elf file and flashes the target device.
J-Flash verifies the (1) scenario as a different checksum than if it were to flash the hex file itself. Similarly, GDB will compare and reflash if the J-Flash hex file (2) had been flashed previously.
How can I find the differences?
A bit about the hardware platform: It has a bootloader and application binaries. The application has access to the SDRAM and NOR flash expansions. The init for NORFLASH has been scripted for both GDB and J-Flash.
Cheers,
Joe