embOS for Cortex M using IAR Embedded Workbench

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • embOS for Cortex M using IAR Embedded Workbench

    Hello,
    it is my first time using your embos.I am using IAR Embedded Workbench 6.0 Kickstar and (Segger)J-Link edu to program the LM3S8962 Evaluation Board.

    The J-link alone works, the Evaluation board alone works too.
    I tried to use the example in the IAR workbench, but the following error appeared:
    Error[Li005]: no definition for "OS_RestoreI" [referenced from C:\Dokumente und
    Einstellungen\daou\Eigene Dateien\IAR Embedded Workbench\arm\RTOS\
    SEGGER\TI_Luminary\LM3S8962\embOS\Output\Start_LM3S8962\DEBUG_Flash\
    Obj\RTOSINIT_LM3S8962.o]
    I've searched in Forum but I didn't find an answer for my question
    Best Regards
    newuser

  • Hello,

    it seems that IAR did not include the embOS libraries for an unknown reason.
    Please download our latest embOS Cortex M IAR trial version at segger.com/cms/download_embos-arm-cortex-m3-iar.html.

    Best regards,
    Til
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.