[ABANDONED] Jlink Upload Hex file from MCU

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hi,
    Thank you for your inquiry.

    There are multiple ways to achieve this. The two easiest ones are:
    1. You create a J-Flash project and read back the chip. Then you can save the data file as .bin / .hex / .mot /...
    2. You can use the "savebin" command of the J-Link Commander to save the target memory into a binary file.

    You can find both of these options and more information about this topic in the J-Link Manual (UM08001) and the J-Flash Manual (UM08003).
    Also, you can show all available commands for the J-Link Commander by issuing the command "?" (without quotations).

    Best regards,
    Fabian
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/


    Or you can contact us via e-mail.