[ABANDONED] Build example error

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] Build example error


    windows7, SEGGER Embedded Studio for ARM Release 4.18 Build 2019070301.39449 Windows x64

    After installing the software SES 4.18, open the example ble_app_uart_pca10040_s132,The building found:

    Building ‘ble_app_uart_pca10040_s132’ from solution ‘ble_app_uart_pca10040_s132’ in configuration ‘Debug’
    Assembling ‘thumb_crt0.s’
    Error starting process C:/Program Files/SEGGER/SEGGER Embedded Studio for ARM 4.18/gcc/arm-none-eabi/bin/cc1
    Build failed

    But the file cc1.exe can be found at C:/Program Files/SEGGER/SEGGER Embedded Studio for ARM 4.18/gcc/arm-none-eabi/bin/cc1.

    thank you !
  • Hello,

    Thank you for your inquiry.
    Such an issue is not known to us. Could you give the latest Embedded Studio version a try? Do you still see the same behaviour?
    Which Nordic SDK version are you using? Could you also use the latest version here?

    Best regards,
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.