I'm working on a breakout board for the Atmel SAML10E15A IC.

I've gotten to the point, using Atmel Studio 7, that I can read the target voltage and device signature. When I go to try programming the chip with a simple blink program I get an error saying that I the programmer was unable to reset the IC. I've double checked the reset line and it's pulled up to 3.3V. I first had a 10K pull-up (really excessive) then I changed to 1K then to 330 then to floating with no avail.

At this point I open the programmer settings and notice that the target device was the Atmel SAML11E15A. The browser tools won't let me adjust the target device and save the settings.

I've spent 3 working days of time narrowing down the issue. Is my programmer the issue? Or am I over-looking something else?

I'm happy to provide more details when asked. I'm not at my work computer at the current moment. Thank you in advance.

Thank you Fabian,

This project is purely educational. When I say working hours I'm meaning time spent sitting and working on this project. I've been 'working' on this project for well over 2 weeks, but I'm doing it either at home or on my lunch breaks at work. It is completely unrelated to my job or any responsibilities.

I'm 90% certain the error is between the keyboard and my chair, me. Either way I'm just trying to wade through the weeds as some of this is brand new to me.

I start with checking the settings in Device Programming tool (pictured: jlink_deviceProgramming.png). I can read the target voltage, device signature, and the fuses read successfully too. I close out and try to run "Start without Debugging" after I run the Build tool (successful build). I then get a popup window saying "Jlink Device Override". "Device type is overridden in Jlink configuration settings to "ATSAML11E15A" (pictured: jlink_deviceOverride.png).

I'm trying to change the device in the Jlink Control Panel (pictured: jlink_controlWindow.png).

I don't have an evaluation board. I thought about getting one, but decided against it. I'll look back into possibly grabbing one. However, do you have any ideas I could try in the meantime?