[SOLVED] Flasher STM8 - Programming Self-Powered Device

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Flasher STM8 - Programming Self-Powered Device

    I want to program a device using a Flasher STM8 over the SWIM interface that may already be powered.

    1. How do I handle connecting the two power supplies?

    2. Will shorting the two power supplies together cause problems?

    3. Must the Flasher's +5V be connected to the target's +5V? ...To sense the supply voltage for example.
  • Answered via mail.


    Summary:
    Flasher stand-alone power supply in the project settings was enabled by the customer by accident.

    Additional information:
    The project settings override the Flasher default state (that is what you set with power on/off perm).

    Please also note that if power is enabled from your project, the power gets enabled during the stand-alone
    operation and is disabled at the end of the stand-alone operation. The Flasher does not return to its default state.

    Best regards,
    Oliver Olligs
    Product Manager
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.