[SOLVED] [bug]SystemView V3.10， The terminal print API “SEGGER_SYSVIEW_ErrorfHost” cannot be resolved on the host side.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] [bug]SystemView V3.10， The terminal print API “SEGGER_SYSVIEW_ErrorfHost” cannot be resolved on the host side.

    C Source Code

    1. SEGGER_SYSVIEW_ErrorfHost("log: CR1_write = %x", fpga_tx_format.data);
    1. The same target machine code is parsed normally in V2.52d.
    2. Under V3.10, the log level mark is not rendered, and the error log cannot be highlighted. And format output, parameter parsing is abnormal.
    3. “SEGGER_SYSVIEW_ErrorfTarget” is parsed normally, but the color rendering is not.

    • Figure 1, V2.52d is normal
    • Figure 2, V3.10 is abnormal
    Images

    • 1.png

      17.66 kB, 618×300, viewed 464 times

    • 2.png

      20.84 kB, 630×431, viewed 529 times

  • Hello,

    Thank you for your inquiry.

    There is an issue with the host formatter in SystemView.
    This will be fixed with the upcoming update, scheduled for this week.

    Sorry for any inconveniences caused.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.