[SOLVED] Unable to upgrade firmware on J-Link Edu Mini
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
-
Hi,
Thank you for your inquiry.
Such an issue is not known to us.
Did you write the config area of the J-Link?
The nickname looks broken. Did you set a nickname for your J-Link?
Could you please try to do the following in the J-Link Configurator:
- reset the config (right click on the J-Link and press "Reset config")
- replace the firmware (right click on the J-Link and press "Replace firmware")
Best regards,
FabianPlease read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail. -
-
Hi,
Did the reset of the config area work though?
Just to eliminate the possibility that this problem is connected to the J-Link Configurator:
Could you please try to update the firmware via the J-Link Commander?
Just open the J-Link Commander and connect to the J-Link EDU Mini.
This should prompt the update dialog.
Best regards,
FabianPlease read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail. -
The J-Link Commander connects successfully to the J-Link Edu mini. The firmware seems to be up-to-date.
Source Code
- SEGGER J-Link Commander V6.60f (Compiled Jan 20 2020 16:16:43)
- DLL version V6.60f, compiled Jan 20 2020 16:15:17
- Connecting to J-Link via USB...O.K.
- Firmware: J-Link EDU Mini V1 compiled Jan 7 2020 16:53:19
- Hardware version: V1.00
- S/N: 801000389
- License(s): GDB, FlashBP
- VTref=0.000V
- Type "connect" to establish a target connection, '?' for help
- J-Link>
How to use the J-Link Commander to force an update and clean the config area? -
Hi,
Yes, you can also reset the config area via J-Link Commander:
Please connect to the J-Link and type "resetconf" (without quotations).
After doing so: Is it now possible to connect to the J-Link EDU mini via J-Link Configurator?
Best regards,
FabianPlease read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail. -
Thank you for your help!
It is now possible to connect via J-Link configurator. As an additional benefit, the name of the probe is clean!
I went through the document UM08001 (Software Version: 6.60, January 6, 2020) but didn't find the "resetconf" command. Maybe a next release will mention it.
The problem is solved now.
Thank you and best regards, -
Hi,
You are welcome!
Good to hear that everything is working as expected now.
Best regards,
FabianPlease read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail.
-
Share
- Facebook 0
- Twitter 0
- Google Plus 0
- Reddit 0