[ABANDONED] My jlink edu mini cannot connect

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] My jlink edu mini cannot connect

    My jlink edu mini cannot connect

    Using J-Mem software, the software prompt can be updated automatically, and then I confirmed that the update was unsuccessful, and now I cannot connect, I can only identify it as Jlink, but I cannot connect to jlink
    Software version is 6.61a || || || || || ||
  • Hi,
    Thanks for your inquiry.

    I am not sure if I understand you correctly.
    What I understand you did:
    1) You installed the J-Link Software and Documentation Pack
    2) You started J-Mem and you were told to update your firmware
    3) You agreed and your firmware was updated unsuccessfully
    4) Now Windows still identifies the J-Link EDU correctly as J-Link but you cannot connect to it via Commander

    Is that correct?
    In this case, could you please sent us a screenshot of your J-Link Commander Output and a J-Link log file?

    How to enable the log file:

    Best regards,
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.