Hello,
I have created a Assembler project. I use a C/C++ template project and change the needed parts (linker script, processor, etc.). My project gets compiled and linked and I can start the debugger, but the breakpoints doesn´t work as I expected. I can place the breakpoint but the debugger doesn´t trigger at the breakpoint and the breakpoint is marked with a questionmark (see Screenshot).
I change the following parts in the project settings:
Code:
Thanks and greetings
Daniel
I have created a Assembler project. I use a C/C++ template project and change the needed parts (linker script, processor, etc.). My project gets compiled and linked and I can start the debugger, but the breakpoints doesn´t work as I expected. I can place the breakpoint but the debugger doesn´t trigger at the breakpoint and the breakpoint is marked with a questionmark (see Screenshot).
I change the following parts in the project settings:
Code:
- Generate Assembler Listing File - Yes
- Always Rebuild - Yes
- ARM Architecture - v6
- ARM Core Type - ARM1136J-S
- ARM FPU Type - VFP
- Byte Order - Little
- Use Manual Linker Script - Yes
- Linker Script File - Path to script
- Entry Point - _start
- Linker - GNU
- Target Device - ARM11
- Run To - _start
- Startup Completion Point - _start
Thanks and greetings
Daniel