Hi,
Somewhere in your project you have the implementation of LCD_X_Config() (not sure how ST calls the file). Within this function the driver gets set up calling GUI_DEVICE_CreateAndLink(). The first parameter is the driver to be used. Here you can use GUIDRV_LIN_OSX_32.
Regards,
Sven
Somewhere in your project you have the implementation of LCD_X_Config() (not sure how ST calls the file). Within this function the driver gets set up calling GUI_DEVICE_CreateAndLink(). The first parameter is the driver to be used. Here you can use GUIDRV_LIN_OSX_32.
Regards,
Sven
Please read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail.