Reflashing st-link doesn't work

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Reflashing st-link doesn't work

      Hello everyone,

      I am trying to reflash my st-link v2 (original=, not the copy) with reflash tool from (segger download page) but it fails.
      My st-link firmware is: V2.J34.S7.





      I hereby accept the amendment to the Evaluation Board License Agreement
      provided by STMICROELECTRONICS ("ST")(A)ccept / (D)ecline
      Selection>a

      [0] Quit
      [1] Upgrade to J-Link
      [2] Update J-Link firmware
      [3] Restore ST-Link
      Selection>1

      Preparing for FW update (can take up to 10 seconds)...ERROR: Unsupported ST-LINK firmware

      [0] Quit
      [1] Upgrade to J-Link
      [2] Update J-Link firmware
      [3] Restore ST-Link
      Selection>1

      Preparing for FW update (can take up to 10 seconds)...ERROR: Unsupported ST-LINK firmware

      [0] Quit
      [1] Upgrade to J-Link
      [2] Update J-Link firmware
      [3] Restore ST-Link
      Selection>1

      Preparing for FW update (can take up to 10 seconds)...Invalid handleERROR: Cannot find an ST-LINK, multiple ST-LINKs plugged in, or ST-LINK is in use

      [0] Quit
      [1] Upgrade to J-Link
      [2] Update J-Link firmware
      [3] Restore ST-Link
      Selection>1

      Preparing for FW update (can take up to 10 seconds)...Invalid handleERROR: Cannot find an ST-LINK, multiple ST-LINKs plugged in, or ST-LINK is in use

      [0] Quit
      [1] Upgrade to J-Link
      [2] Update J-Link firmware
      [3] Restore ST-Link
      Selection>

      Any hints what could be wrong?
      Tnx in advance.
    • Hi,
      Thank you for your inquiry.

      Could you provide us with the name of the eval board you are using?
      Are you using the newest SEGGER STLinkReflash tool?
      Are you using the newest J-Link Software and Documentation Pack?

      segger.com/downloads/jlink/#J-…twareAndDocumentationPack

      Best regards,
      Fabian
      Please read the forum rules before posting: Forum Rules

      Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/


      Or you can contact us via e-mail.