[SOLVED] ST-Link On Board feedback

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] ST-Link On Board feedback

    Was messing with a NUCLEO-F411RE board and decided to convert the onboard STLink to JLink.

    Downloaded the file from: segger.com/downloads/jlink/STLinkReflash

    When I ran it, observed the following:
    1. The included JLinkArm.DLL is really old - version 5.12 (IIRC)

    2. The copyright is old:
      (c) 2016 SEGGER Microcontroller GmbH & Co. KG segger.com
      STLinkReflash compiled Aug 12 2019 10:30:05
    3. The Firmware Version History at: segger.com/products/debug-prob…j-links/st-link-on-board/ doesn't have an entry for the current version
    Thanks for creating this replacement code.
  • Hello,

    Thank you for your feedback.
    We will discuss this internally and improve the tool where needed.

    Best regards,
    Nino
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.