Can J-Link program the flash on this device CC3220SF ?
Or is it only in-RAM debugging.
Or is it only in-RAM debugging.
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
Cortex-M4 | Parallel CFI NOR flash Program flash (Bank0) Program flash (Bank1) |
grantch wrote:
v01d,
According to the link here
segger.com/products/debug-prob…pported-cpus-and-devices/
under the "List of Known Devices" it says
CC3220SF
Cortex-M4 Parallel CFI NOR flashProgram flash (Bank0)
Program flash (Bank1)
Hope this helps
CG
SEGGER - Nino wrote:
So programming should work. If debugging works in Flash depends on the target specifics.