[SOLVED] Starting configuration for STM32F103C8T6 FreeRTOS

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Starting configuration for STM32F103C8T6 FreeRTOS

    Hi all!

    Could someone please share configuration for STM32F103C8T6 FreeRTOS.
    I have used STM32CubeMX and now would like to debug my FreeRTOS with SystemView.

    Tnx in advance!

  • Hello,

    Thank you for your inquiry.
    All needed information to get SystemView up and running with your application can be found in the SystemView manual and our Wiki:
    wiki.segger.com/FreeRTOS_with_SystemView

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.