[SOLVED] Ozone Bug: RTT messages sent to Terminal window OR telnet at random

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Ozone Bug: RTT messages sent to Terminal window OR telnet at random

    Ozone 2.7.0a on Linux x64

    My STM32 application uses RTT to print debug messages.

    When the "Terminal" window is open, and also a telnet client is connected to localhost:19021, RTT messages are sent to either the Terminal window, or the telnet client (seemingly at random).

    I would expect that all messages are sent to both the terminal window and the telnet server reliably.
    Alternatively, the Terminal Window should be grayed out when another client is connected.

    The current behavior breaks both features when used at the same time.

    The post was edited 2 times, last by thomask77 ().

  • Hello,

    Thank you for your inquiry.
    The reported behaviour is expected. The RTT data can only be read by one application at a time.
    After a read the data is no longer available.

    Best regards,
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.