[SOLVED] How to display jpeg images on ssd1331 using nRF52840 ?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hello,

    Thank you for your inquiry.
    This question is not really Embedded Studio related but rather target application related.
    Generally you would have to create a driver for your screen so your nRF52 can display inputs on the display.
    After that you need your application to be able to translate jpeg information for your display driver to understand.

    We at SEGGER offer a graphics library called emWin that would be capable of the aforementioned things.
    segger.com/products/user-interface/emwin/
    But we currently have no out-of-the-box solution for this particular MCU and display combination so additional cost would apply to port it on your setup.
    Would that be of interest for you?

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.