J-Link EDU for reading ETM of ARM Cortex-M4 series

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • J-Link EDU for reading ETM of ARM Cortex-M4 series

      Dear all,
      do you know if J-Link EDU can be used to access data stored within ETM?
      From the documentation, it is clear that J-Link EDU does not support tracing of ARM M-series, but the question is whether it is able to access data stored within ETM, also off-line, without specific tracing requirements.

      Thank you.
      Giacomo
    • Hello Giacomo,

      Thank you for your inquiry. That data can only be accessed with a J-Link EDU if the target device has an MTB or ETB implemented.
      In all other cases a J-Trace PRO would be needed to capture the ETM data that is streamed out of the trace port on the target device.
      See here for more information about the different trace types:
      wiki.segger.com/General_information_about_tracing

      Best regards,
      Nino
      Please read the forum rules before posting: Forum Rules

      Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support contact us per e-mail.
      Alternatively our support system can be used as well: segger.com/ticket/