I am getting this error message, only after using breakpoints. I have swapped debuggers but no joy. This just started out of the blue. Any help will be appreciated.
SEGGER J-Link GDB Server V6.34c - Terminal output channel
Connection closed by the GDB server.
Connecting to J-Link...
J-Link is connected.
Firmware: J-Link V10 compiled Aug 23 2018 09:46:11
Hardware: V10.10
S/N: 50115113
Feature(s): GDB
Checking target voltage...
Target voltage: 3.26 V
Listening on TCP/IP port 2331
Connecting to target...Connected to target
Waiting for GDB connection...Connected to 127.0.0.1
Reading all registers
Read 4 bytes @ address 0x000074FE (Data = 0x4807E7FD)
Read 2 bytes @ address 0x000074FE (Data = 0xE7FD)
Received monitor command: speed 1000
Target interface speed set to 1000 kHz
Received monitor command: speed auto
Select auto target interface speed (2000 kHz)
Received monitor command: flash breakpoints 0
Flash breakpoints disabled
Read 4 bytes @ address 0x00001FC0 (Data = 0x00000000)
Read 4 bytes @ address 0x00001FC4 (Data = 0x002D0403)
Read 4 bytes @ address 0x00001FC8 (Data = 0x00000000)
Read 4 bytes @ address 0x00001FCC (Data = 0xB24397BA)
GDB closed TCP/IP connection
SEGGER J-Link GDB Server V6.34c - Terminal output channel
Connection closed by the GDB server.
Connecting to J-Link...
J-Link is connected.
Firmware: J-Link V10 compiled Aug 23 2018 09:46:11
Hardware: V10.10
S/N: 50115113
Feature(s): GDB
Checking target voltage...
Target voltage: 3.26 V
Listening on TCP/IP port 2331
Connecting to target...Connected to target
Waiting for GDB connection...Connected to 127.0.0.1
Reading all registers
Read 4 bytes @ address 0x000074FE (Data = 0x4807E7FD)
Read 2 bytes @ address 0x000074FE (Data = 0xE7FD)
Received monitor command: speed 1000
Target interface speed set to 1000 kHz
Received monitor command: speed auto
Select auto target interface speed (2000 kHz)
Received monitor command: flash breakpoints 0
Flash breakpoints disabled
Read 4 bytes @ address 0x00001FC0 (Data = 0x00000000)
Read 4 bytes @ address 0x00001FC4 (Data = 0x002D0403)
Read 4 bytes @ address 0x00001FC8 (Data = 0x00000000)
Read 4 bytes @ address 0x00001FCC (Data = 0xB24397BA)
GDB closed TCP/IP connection