[SOLVED] OZONE - JTrace - Configuring alternate trace pins on an XMC4700

coyote3236 · Jun 25th 2019, 3:17pm

The XMC4700 has ability to map trace pins to alternate pins. Each pin has 3 choices. My hardware uses port 7 and 8. How do I get that configured with Ozone?

TRACECLK Port P2.14 , P6.0, P7.8
TRACEDATA0 Port P2.13 , P6.6, P8.0
TRACEDATA1 Port P2.12 , P6.5, P8.1
TRACEDATA2 Port P2.11 , P6.2, P8.2
TRACEDATA3 Port P2.10 , P6.1, P8.3

SEGGER - Nino · Jun 26th 2019, 11:10am

Hello,

Thank you for your inquiry.
You can configure the trace config use a JLinkScript file:
wiki.segger.com/How_to_configu…t_files_to_enable_tracing

For the XMC4500 we can provide you with an example script for reference if you are interested:
wiki.segger.com/Tracing_on_Infineon_XMC4500_series_MCUs
For this please contact us via our support channel as described in my signature.

Also I noticed that you seem to be using the older non "PRO" J-Trace model.
We recommend upgrading to the newest model to gain access to features like streaming trace and many more:
wiki.segger.com/J-Trace_vs._J-Trace_PRO

For this our trade in program can be used so you get a discount when trading in your older model:

segger.com/purchase/trade-in-program/

Best regards,
Nino

[SOLVED] OZONE - JTrace - Configuring alternate trace pins on an XMC4700

[SOLVED] OZONE - JTrace - Configuring alternate trace pins on an XMC4700

Share

Tags