RTT - Corrupt mutex with FreeRTOS

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • RTT - Corrupt mutex with FreeRTOS

      Hi

      So I start to play with RTT on a very simple program with 4 task on FreeRTOS

      Each task is very simple. Basically it displays the task name and toggle a led

      (dbg_printf_write function just add some data before using SEGGER_RTT_printf)

      C Source Code

      1. void start_generic_task(void *argument)
      2. {
      3. osMutexAcquire(mutex_rttHandle, osWaitForever);
      4. dbg_printf_write(DBG_CODE_GENERIC_TASK, DBG_SEV_INFO, "Start task: %s", osThreadGetName(osThreadGetId()));
      5. osMutexRelease(mutex_rttHandle);
      6. for(;;)
      7. {
      8. osDelay(500);
      9. LL_GPIO_TogglePin(LD3_GPIO_Port, LD3_Pin);
      10. }
      11. }
      Display All

      When the last task try to release the mutex, I got stuck on an assert :cursing:
      After some research I found that the cullprit was the va_start inside SEGGER_RTT_printf.
      edit: I add a mutex just to be sure

      For some unknown reason, on the last printf call, the va_start function modify some data use by the mutex and so the assert function catch it!

      Is there something special to do when using with RTT and FreeRTOS ?

      The post was edited 1 time, last by Brice_38_FR ().