I am trying to erase the flash on my NXP MK64FN1MOXXX12 in J-Link Commander.
Any ideas what I am doing wrong ?
SEGGER J-Link Commander V6.44f (Compiled Apr 12 2019 17:17:37)
DLL version V6.44f, compiled Apr 12 2019 17:17:02
Connecting to J-Link via USB...O.K.
Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46
Hardware version: V8.00
S/N: 58006015
License(s): RDI,FlashDL,FlashBP,JFlash
VTref=0.000V
Type "connect" to establish a target connection, '?' for help
J-Link>connect
Please specify device / core. <Default>: MK64FN1M0XXX12
Type '?' for selection dialog
Device>Device MK64FN1MOXXX12
Please specify target interface:
J) JTAG (Default)
S) SWD
F) FINE
I) ICSP
C) C2
T) cJTAG
TIF>J
Device position in JTAG chain (IRPre,DRPre) <Default>: -1,-1 => Auto-detect
JTAGConf>Auto-detect
ERROR while parsing value for IRPre. Using default: -1.
ERROR while parsing value for DRPre. Using default: -1.
Specify target interface speed [kHz]. <Default>: 4000 kHz
Speed>-1
Device "MK64FN1M0XXX12 (ALLOW SECURITY)" selected.
Connecting to target via JTAG
****** Error: JLINKARM_SetSpeed(-1kHz): Maximum JTAG speed exceeded. Did you spe
cify speed in Hz instead of kHz ?
Cannot connect to target.
J-Link>Device MK64FN1MOXXX12
J-Link>connect
Device "MK64FN1M0XXX12 (ALLOW SECURITY)" selected.
Connecting to target via JTAG
****** Error: JLINKARM_SetSpeed(-1kHz): Maximum JTAG speed exceeded. Did you spe
cify speed in Hz instead of kHz ?
Cannot connect to target.
J-Link>connect
Device "MK64FN1M0XXX12 (ALLOW SECURITY)" selected.
Connecting to target via JTAG
****** Error: JLINKARM_SetSpeed(-1kHz): Maximum JTAG speed exceeded. Did you spe
cify speed in Hz instead of kHz ?
Cannot connect to target.
J-Link>
Any ideas what I am doing wrong ?
SEGGER J-Link Commander V6.44f (Compiled Apr 12 2019 17:17:37)
DLL version V6.44f, compiled Apr 12 2019 17:17:02
Connecting to J-Link via USB...O.K.
Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46
Hardware version: V8.00
S/N: 58006015
License(s): RDI,FlashDL,FlashBP,JFlash
VTref=0.000V
Type "connect" to establish a target connection, '?' for help
J-Link>connect
Please specify device / core. <Default>: MK64FN1M0XXX12
Type '?' for selection dialog
Device>Device MK64FN1MOXXX12
Please specify target interface:
J) JTAG (Default)
S) SWD
F) FINE
I) ICSP
C) C2
T) cJTAG
TIF>J
Device position in JTAG chain (IRPre,DRPre) <Default>: -1,-1 => Auto-detect
JTAGConf>Auto-detect
ERROR while parsing value for IRPre. Using default: -1.
ERROR while parsing value for DRPre. Using default: -1.
Specify target interface speed [kHz]. <Default>: 4000 kHz
Speed>-1
Device "MK64FN1M0XXX12 (ALLOW SECURITY)" selected.
Connecting to target via JTAG
****** Error: JLINKARM_SetSpeed(-1kHz): Maximum JTAG speed exceeded. Did you spe
cify speed in Hz instead of kHz ?
Cannot connect to target.
J-Link>Device MK64FN1MOXXX12
J-Link>connect
Device "MK64FN1M0XXX12 (ALLOW SECURITY)" selected.
Connecting to target via JTAG
****** Error: JLINKARM_SetSpeed(-1kHz): Maximum JTAG speed exceeded. Did you spe
cify speed in Hz instead of kHz ?
Cannot connect to target.
J-Link>connect
Device "MK64FN1M0XXX12 (ALLOW SECURITY)" selected.
Connecting to target via JTAG
****** Error: JLINKARM_SetSpeed(-1kHz): Maximum JTAG speed exceeded. Did you spe
cify speed in Hz instead of kHz ?
Cannot connect to target.
J-Link>