Emwin and PIC32MZ gpu support

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Emwin and PIC32MZ gpu support

      Hi,

      We intend to use emwin and PIC32MZDAH with GPU support for our product.
      Is it possible to configure or customize emwin for utilizing the nano2D library.

      Thanks :)

      Regards,
      TZurich
    • Hi,

      Unfortunately, I have no experience with the nano2D library. Basically, it is possible to support different kinds of hardware acceleration as we already do with the DMA2D of the STM32 and the DAVE2D engine of the Renesas RX65.

      You might take a look into the manual chapter 38.6 Hardware acceleration. There you will find the API description of the functions used to route drawing operations to the hardware. I have also attached an LCD configuration for the STM32 which shows how it could be done.

      Regards,
      Sven
      Files
      • LCDConf.zip

        (20.38 kB, downloaded 193 times, last: )
      Please read the forum rules before posting.

      Keep in mind, this is *not* a support forum.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/

      Or you can contact us via e-mail.