[SOLVED] "Iterating through AP map to find AHB-AP to use" on search for APB

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] "Iterating through AP map to find AHB-AP to use" on search for APB

    On connect, there seem to be a cosmetic problem, likely caused by copy&paste.

    Source Code

    1. TotalIRLen = 4, IRPrint = 0x01
    2. JTAG chain detection found 1 devices:
    3. #0 Id: 0x4BA00477, IRLen: 04, CoreSight JTAG-DP
    4. Scanning AP map to find all available APs
    5. AP[3]: Stopped AP scan as end of AP map has been reached
    6. AP[0]: AHB-AP (IDR: 0x44770001)
    7. AP[1]: APB-AP (IDR: 0x24770002)
    8. AP[2]: JTAG-AP (IDR: 0x14760010)
    9. Iterating through AP map to find AHB-AP to use
    10. AP[0]: Skipped. Not an APB-AP
    11. AP[1]: APB-AP found
    12. Found Cortex-A9 r3p0
    13. 6 code breakpoints, 4 data breakpoints
    Display All

    Line 9 should likely read

    "Iterating through AP map to find APB-AP to use"

  • Hello,

    Thank you for your feedback.
    Good find. Will be fixed in the next version.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.