[ABANDONED] High Speed Sampling Bandwidth

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hello,

    Thank you for your inquiry.
    The 1 kHz value is not the maximum value but a guaranteed value for one specific setup. You should see a footnote at that value explaining how it came to be.
    In theory sampling rates >10 kHz are achievable for a single variable.

    Embedded wrote:

    Is this a hardware limitation ?
    It is generally a target device limitation.
    See here segger.com/products/debug-prob…nk/models/model-overview/
    (Even though J-Trace PRO should also show Unlimited* as the J-Link PRO model. Website will be updated accordingly.)
    We can guarantee a sampling frequency of 1 kHz for 1 variable with 1 MHz interface speed.
    If you try to sample multiple variables you definitely need to increase the target interface speed to keep 1 kHz sampling frequency for each variable.
    Our high end probes support up to 50 MHz target interface speed. However this does not mean your target device will work that fast. So again the most likely bottleneck will be the target device and not the debug probe.

    Instead of HSS RTT could be used. The benefit would be that we work with a on target buffer here and can transfer larger data blocks at once which in theory will yield in a larger data throughput:
    segger.com/products/debug-prob…about-real-time-transfer/
    With RTT you can reach a data transfer rate of ~2 MB/s. The drawback would be that code would need to be executed on the target device which could impact your real time behaviour slightly.

    Best regards,
    Nino
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support contact us per e-mail.
    Alternatively our support system can be used as well: segger.com/ticket/