[SOLVED] Infineon XMC 2Go Debug failed , Using JLink V644b

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Infineon XMC 2Go Debug failed , Using JLink V644b

    Help me see what is wrong? Please

    I am using infineon XMC 2Go Evaluation Boards and DAVE-IDE-4.4.2-64Bit

    SEGGER JLink_Windows_V644b,

    Already viewed segger forum, test failed many times

    What am I doing wrong? Please help me.....
    Images
    • 1.jpg

      252.45 kB, 1,920×1,080, viewed 1,067 times
    • 2.jpg

      300.25 kB, 1,920×1,080, viewed 859 times
    • 3.jpg

      392.22 kB, 1,920×1,080, viewed 918 times
    • 4.jpg

      331.38 kB, 1,920×1,080, viewed 767 times
  • Hello,

    Thank you for your inquiry.
    From J-Link perspective the connect seems to have worked.
    For reference could you provide a screenshot of a J-Link Commander connect sequence?
    wiki.segger.com/J-Link_cannot_…ty_using_J-Link_Commander

    From the error message it appears that DAVE is using a wrong target device name. For this issue we recommend contacting Infineon support as it is not related to J-Link software.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.
  • Hi Nino, thank you for your reply.

    Please help me to check again.J-Link Commander connect sequence.

    If there is no problem with the J-LINK setting.

    I have to contact Infineon.

    Thank
    Best regards,
    John
    Images
    • 5.jpg

      288.22 kB, 1,920×1,080, viewed 589 times
  • Hi John,

    Thank you for providing the connect sequence screenshot.
    From it we can see that from J-Link perspective everything is working correctly. What seems not to be working is DAVE telling J-Link the correct target device name.
    For this Infineon DAVE support is the correct contact.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.