[SOLVED] LAUNCHXL CC26X2R1 + Code Composer + JLINK EDU MINI

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] LAUNCHXL CC26X2R1 + Code Composer + JLINK EDU MINI

    I have gotten EK-TM4C1294XL + CCS + Jlink Edu Mini to work. So I believe my CCS + JLINK works.
    I cannot get LaunchXL CC26X2R1 + Code Composer + JLINK Edu Mini to work

    CCS: Version: 8.0.0.00016
    SEGGER J-Link Support 6.44.1.0
    SEGGER J-Link USB Driver 1.0.0.6
    Windows 10
    Today the JLINK firmware was updated by CCS (did not change a thing)

    With CCS I get:
    Cortex_M4_0: Error: Stat [ JLINKARM_IsHalted() call ] failed!
    Cortex_M4_0: GEL: Error while executing OnTargetConnect(): Evaluation canceled
    Cortex_M4_0: Unable to determine target status after 20 attempts

    Within JLink commander I have:
    J-Link>connect
    Please specify device / core. <Default>: CC2652R1F
    Type '?' for selection dialog
    Device>
    Please specify target interface:
    J) JTAG (Default)
    S) SWD
    T) cJTAG
    TIF>J
    Device position in JTAG chain (IRPre,DRPre) <Default>: -1,-1 => Auto-detect
    JTAGConf>
    Specify target interface speed [kHz]. <Default>: 4000 kHz
    Speed>
    Device "CC2652R1F" selected.


    Connecting to target via JTAG
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000

    ****** Error: InitTarget(): PCode returned with error code -1

    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
    InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000

    ****** Error: InitTarget(): PCode returned with error code -1

    Cannot connect to target.

    I have the following connections and have verified the voltages where indicated:
    Others have said they have no problem.
    I have also tried without external power and just the GND, 5V and 3V3 + USB connected. Same thing.

    Any suggestions would be appreciated.
  • Hello,

    Thank you for your inquiry.
    To be able to connect signals GND, 5V and 3V3 must be jumpered.
    See here for more details:
    wiki.segger.com/LAUNCHXL_CC2650

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.