Dear,

I can not succeed to Flash External Flash on RT1052 (NXP) with Jlink Ultra + , I got error like :

****** Error: Can not read register 15 (R15) while CPU is runningCan not read register 7 (R7) while CPU is runningCan not read register 6 (R6) while CPU is runningCan not read register 5 (R5) while CPU is runningCan not read register 4 (R4) while CPU is runningCan not read register 3 (R3) while CPU is runningCan not read register 2 (R2) while CPU is runningCan not read register 1 (R1) while CPU is runningCan not read register 0 (R0) while CPU is runningCan not read register 15 (R15) while CPU is runningPC of target system has unexpected value after preparing target. (PC = 0x00000000)!
---------------------------------------------------------------------- Registers -------------------------------------------------------------------------------------
PC = 00000000
Current: R0 = 00000000, R1 = 00000000, R2 = 00000000, R3 = 00000000
R4 = 00000000, R5 = 00000000, R6 = 00000000, R7 = 00000000
-------------------------------------------------------------------------------------------------------------
Unspecified error -1
Script processing completed.
Unable to perform operation!
Command failed with exit code 1

Do I miss somethings ?

Hello,

Yes I did, but still have problem.

Best Regards