[SOLVED] NXP RT1052 with only External Flash and Segger Jlink

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] NXP RT1052 with only External Flash and Segger Jlink

    Dear,

    I can not succeed to Flash External Flash on RT1052 (NXP) with Jlink Ultra + , I got error like :

    ****** Error: Can not read register 15 (R15) while CPU is runningCan not read register 7 (R7) while CPU is runningCan not read register 6 (R6) while CPU is runningCan not read register 5 (R5) while CPU is runningCan not read register 4 (R4) while CPU is runningCan not read register 3 (R3) while CPU is runningCan not read register 2 (R2) while CPU is runningCan not read register 1 (R1) while CPU is runningCan not read register 0 (R0) while CPU is runningCan not read register 15 (R15) while CPU is runningPC of target system has unexpected value after preparing target. (PC = 0x00000000)!
    ---------------------------------------------------------------------- Registers -------------------------------------------------------------------------------------
    PC = 00000000
    Current: R0 = 00000000, R1 = 00000000, R2 = 00000000, R3 = 00000000
    R4 = 00000000, R5 = 00000000, R6 = 00000000, R7 = 00000000
    -------------------------------------------------------------------------------------------------------------
    Unspecified error -1
    Script processing completed.
    Unable to perform operation!
    Command failed with exit code 1

    Do I miss somethings ?
  • Hello,

    Thank you for your inquiry.
    Did you consider the necessary steps to enable the external Flash on the RT1050 board?
    wiki.segger.com/I.MXRT1050

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.