[SOLVED] j-link list breakpoints

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] j-link list breakpoints

    I seem to be un able to locate the j-link command to list the current breakpoints.

    Connecting to J-Link via USB...O.K.
    Firmware: J-Link OB-SAM3U128-V2-NordicSemi compiled Jan 7 2019 14:07:15
    Hardware version: V1.00
    S/N: 682394615
    VTref=3.300V

    Mac OS Mojave 10.14.4
  • Hello,

    Thank you for your inquiry.
    There is currently no command to list breakpoints but you can make them visible in the web control panel:
    wiki.segger.com/J-Link_control_panel
    There in tab Breakpoints.
    Keep in mind that only breakpoints that have been set during the current session will be visible. Of others J-Link has no information of.

    Best regards,
    Nino
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support contact us per e-mail.
    Alternatively our support system can be used as well: segger.com/ticket/
  • Hello,

    Did you try to open the mentioned web control link in your folder?

    Wiki wrote:

    A web version is also available via localhost:19080/ on all platforms.
    Which J-Link software version are you using? Could you try the latest one?

    Best regards,
    Nino
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support contact us per e-mail.
    Alternatively our support system can be used as well: segger.com/ticket/