[SOLVED] How to debug app with interrupts on Cortex M0 with JLink and SES

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] How to debug app with interrupts on Cortex M0 with JLink and SES

    Using Segger Embedded Studio what is the best practice for configuring the debugger for an app with interrupts(PWM for NRF51822)?

    For example:
    - are there any files that should be added to the project that assist debugging?
    - is it possible/useful to mask interrupts to facilitate debugging – if so, how?

    Many thanks for any help

    pS
  • Hello,

    Thank you for your inquiry.
    This seems to be a device specific question. We suggest contacting Nordic Semi support for device specific questions.
    As a starting point we suggest using the Nordic SDK as as it comes with numerous example projects for nRF51 and 52 Evalboards that run out-of-the-box in Embedded Studio.

    Best regards,
    Nino
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support contact us per e-mail.
    Alternatively our support system can be used as well: segger.com/ticket/