[SOLVED] Xilinx single core (XC7007s/7014s) support in GDB

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Xilinx single core (XC7007s/7014s) support in GDB

    Dear,

    I noticed that for the EmUSB, there is support for the single core Xilinx Zynq devices (as also used on the Avnet Minized).
    We are using the single core (Z7014s), would it be possible to manually edit some files to make it possible to use the Segger GDB server on this device?
    We have it working on the Microzed, but we really would like to have it working on the single core variant also, that is used on our product.

    Kind regards,

    Tom Lamers
  • Hello Tom,

    Thank you for your inquiry.
    The mentioned Xilinx core is currently not supported. A list with supported devices can be found here:
    segger.com/downloads/supported-devices.php

    You could try selecting the Z7010 instead and see if it works, but no promises.
    To quickly check if connection is working J-Link commander can be used.
    wiki.segger.com/J-Link_cannot_…ty_using_J-Link_Commander


    Best regards,

    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.
  • Hello Tom,

    Great to hear that you are up and running again.
    This thread will be closed now.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.