stm32f746 discovery

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Hi,

      The touch input on the STM32F746 Discovery is not processed with interrupts. At least in our example project it gets polled periodically (every 25ms).

      The emWin library has no interrupt management. You can pass the touch point data to emWin by using GUI_PID_StoreState(). Attached is an example touch implementation.

      Regards,
      Sven
      Files

      • PIDConf.zip

        (1.57 kB, downloaded 509 times, last: )
      Please read the forum rules before posting.

      Keep in mind, this is *not* a support forum.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/
      Or you can contact us via e-mail.