JLink icon spam

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • JLink icon spam



      so I've run some automated test process overnight, that basically with each test was instantiating a python process which used pylink to connect to JLink, read some SWO data and log it. That process was being terminated by a parent process.
      I needed to do it like this because unfortunately when the target MCU switches back and forth it's frequency (and SWO frequency too), the SWO readout never recovers even though it get's back to the correct frequency it was set to in the first place.

      In any event, this is what I saw in the morning after expanding the Windows' icon bar:


      It also produces really cool "animation" after hovering the mouse over those icons, as Windows starts to clear them...

    • New


      Thank you for your inquiry.
      We are aware of this.
      However it only appears if the J-Link DLL is not terminated correctly through the application (in this case pylink).
      It is a little Windows quirk where Windows is not very friendly in the task bar to applications that have been terminated out of order.
      Make sure to terminate your program correctly each time then this should not happen.

      Best regards,
      Please read the forum rules before posting: Forum Rules

      Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support contact us per e-mail.
      Alternatively our support ticketing system can be used as well: segger.com/ticket/