Hello,
I just tried to use our Flasher Portable Plus to Flash MPC5604B in standalone mode.
Before Version 6.32g, Flasher Portable Plus could not flash MPC5604B at all. In later versions, flashing with J-Flash tool works, but standalone mode still doesn't work.
On the display only an ERROR message "#ERR255:Error while flashing" appears after a random time (0.5 to 3 seconds) of "Connecting...". In the log file on the flasher one of the following messages appear:
ERROR: PC of target system has unexpected value after checking target RAM. (PC = 0x40000012, MSR = 0x00000000)!
SN: 0 - Failed
ERROR:
SN: 0 - Failed
Best regards
Martin
I just tried to use our Flasher Portable Plus to Flash MPC5604B in standalone mode.
Before Version 6.32g, Flasher Portable Plus could not flash MPC5604B at all. In later versions, flashing with J-Flash tool works, but standalone mode still doesn't work.
On the display only an ERROR message "#ERR255:Error while flashing" appears after a random time (0.5 to 3 seconds) of "Connecting...". In the log file on the flasher one of the following messages appear:
ERROR: PC of target system has unexpected value after checking target RAM. (PC = 0x40000012, MSR = 0x00000000)!
SN: 0 - Failed
ERROR:
SN: 0 - Failed
Best regards
Martin