[ABANDONED] CC3220SF running FreeRTOS gets stuck on prvPortStartFirstTask()

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] CC3220SF running FreeRTOS gets stuck on prvPortStartFirstTask()

    We are having difficulties when debugging our application based on TI CC3220SF and running FreeRTOS, which gets stuck on call "svc 0" in function "prvPortStartFirstTask()". It succeeds to start the first OS task only sporadically, but works just fine when running without the debugger. Therefore we think that this could be the issue there. We use J-Link with V6.34g SW in JTAG mode together with TI Code Composer Studio v8.2. When the issue occurs, the SVCall handler seems to be installed properly.

    Thanks for any ideas!
  • Hello,

    Thank you for your inquiry.
    Such an issue is not known to us.
    Could you provide a J-Link log of a failing session? wiki.segger.com/Enable_J-Link_log_file
    Does the issue appear when using Ozone isntead of CCS? segger.com/products/development-tools/ozone-j-link-debugger/

    Best regards,

    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.