[SOLVED] Connecting to a JLink RTT "telnet" port from another IP node? (2nd attempt)

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Connecting to a JLink RTT "telnet" port from another IP node? (2nd attempt)

    Hi,

    January 2017, in thread forum.segger.com/index.php?pag…ad&postID=13331#post13331, "Segger - Niklas" writes that he anticipated that connections from remote nodes to JLink should be possible just a month later. When looking at the documentation for JLink today, I cannot see any such command line option.

    Was this feature implemented? If so, how do I use it?

    regards,
    Elm

  • Hello Elm,

    Thank you for your inquiry.
    This has been implemented for a while but unfortunately it was not added to the manual.
    The command string would be RTTTelnetAllowNonLocalClient and needs to be set to 1.
    Now J-Link accepts external requests for RTT.
    A documentation and wiki article will follow shortly.
    Sorry for any inconvenience caused.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.