Dear all,
I just found out that some defines for interrupts are missing in the file ATSAME70Q21_Vectors.s. The missing vectors are right after the PWM1 vector that I kept here for better orientation where I think definitions are missing.
PWM1_IRQn = 60, /**< 60 SAME70Q21 Pulse Width Modulation 1 (PWM1) */
FPU_IRQn = 61, /**< 61 SAME70Q21 Floating Point Unit Registers (FPU) */
SDRAMC_IRQn = 62, /**< 62 SAME70Q21 SDRAM Controller (SDRAMC) */
RSWDT_IRQn = 63, /**< 63 SAME70Q21 Reinforced Safety Watchdog Timer (RSWDT) */
CCW_IRQn = 64, /**< 64 SAME70Q21 System Control Registers (SystemControl) */
CCF_IRQn = 65, /**< 65 SAME70Q21 System Control Registers (SystemControl) */
GMAC_Q1_IRQn = 66, /**< 66 SAME70Q21 Gigabit Ethernet MAC (GMAC) */
GMAC_Q2_IRQn = 67, /**< 67 SAME70Q21 Gigabit Ethernet MAC (GMAC) */
IXC_IRQn = 68, /**< 68 SAME70Q21 Floating Point Unit Registers (FPU) */
I2SC0_IRQn = 69, /**< 69 SAME70Q21 Inter-IC Sound Controller (I2SC0) */
I2SC1_IRQn = 70, /**< 70 SAME70Q21 Inter-IC Sound Controller (I2SC1) */
Is there a reason for this missing definitions. I'm using SES 3.5 and just created my project a few days ago. I also have installed the package v1.02 for SAME µC. So I think I'm up to date.
I didn't check but I guess the definitions are also missing for all the derivatives of the SAME70
Best Regards
Markus
I just found out that some defines for interrupts are missing in the file ATSAME70Q21_Vectors.s. The missing vectors are right after the PWM1 vector that I kept here for better orientation where I think definitions are missing.
PWM1_IRQn = 60, /**< 60 SAME70Q21 Pulse Width Modulation 1 (PWM1) */
FPU_IRQn = 61, /**< 61 SAME70Q21 Floating Point Unit Registers (FPU) */
SDRAMC_IRQn = 62, /**< 62 SAME70Q21 SDRAM Controller (SDRAMC) */
RSWDT_IRQn = 63, /**< 63 SAME70Q21 Reinforced Safety Watchdog Timer (RSWDT) */
CCW_IRQn = 64, /**< 64 SAME70Q21 System Control Registers (SystemControl) */
CCF_IRQn = 65, /**< 65 SAME70Q21 System Control Registers (SystemControl) */
GMAC_Q1_IRQn = 66, /**< 66 SAME70Q21 Gigabit Ethernet MAC (GMAC) */
GMAC_Q2_IRQn = 67, /**< 67 SAME70Q21 Gigabit Ethernet MAC (GMAC) */
IXC_IRQn = 68, /**< 68 SAME70Q21 Floating Point Unit Registers (FPU) */
I2SC0_IRQn = 69, /**< 69 SAME70Q21 Inter-IC Sound Controller (I2SC0) */
I2SC1_IRQn = 70, /**< 70 SAME70Q21 Inter-IC Sound Controller (I2SC1) */
Is there a reason for this missing definitions. I'm using SES 3.5 and just created my project a few days ago. I also have installed the package v1.02 for SAME µC. So I think I'm up to date.
I didn't check but I guess the definitions are also missing for all the derivatives of the SAME70
Best Regards
Markus