[SOLVED] Programming a 25LC320 or similiar simple SPI Flash

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Programming a 25LC320 or similiar simple SPI Flash

    Is it possible to program a microchip 25LC320 SPI flash using the jlink pro and a JLink SPI software.
    The supported parts all seem to be much larger.
    I have tried to manually config the part, but as an example the software ask for the bulk erase command, and a sector size, neither of which is supported on these simple parts. ?(
  • Hello,

    Thank you for your inquiry.
    We received your request per e-mail as well.
    To make sure that no information gets lost over multiple communication channels this thread will be closed now and further correspondence will be held via e-mail.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.