Greetings.
I'm trying to set up with an NXP OM40001 development kit. It's an LPC804 Cortex M0. User guide here: https://www.nxp.com/docs/en/user-guide/UM11083.pdf
The on-board SWD is disabled as per instructions for J1.
Below is the output from J-Link. Any ideas on what to try next?
TAIA
Display All
I'm trying to set up with an NXP OM40001 development kit. It's an LPC804 Cortex M0. User guide here: https://www.nxp.com/docs/en/user-guide/UM11083.pdf
The on-board SWD is disabled as per instructions for J1.
Below is the output from J-Link. Any ideas on what to try next?
TAIA
Source Code
- J-Link>connect ?
- Device "LPC804" selected.
- Connecting to target via JTAG
- Could not measure total IR len. TDO is constant high.
- Could not measure total IR len. TDO is constant high.
- TotalIRLen = ?, IRPrint = 0x..000000000000000000000000
- TotalIRLen = ?, IRPrint = 0x..000000000000000000000000
- Cannot connect to target.
- J-Link>