[SOLVED] Cortex M0+ Micro Trace Buffer in Ozone?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Cortex M0+ Micro Trace Buffer in Ozone?

    Does the Ozone trace facility support the Micro Trace Buffer in M0+ cores?

    If so, will it work with an ST-Link onboard converted to J-Link STLink V21 ?

  • Hello,

    Thank you for your inquiry.

    apullin wrote:

    Does the Ozone trace facility support the Micro Trace Buffer in M0+ cores?
    It does, all you need to do is select "Trace Buffer" as trace source.

    apullin wrote:

    If so, will it work with an ST-Link onboard converted to J-Link STLink V21 ?
    It will, however keep in mind that the converted J-Link STLink can only be used with Ozone for evaluation purposes.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.