Hello,
I am currently working on a Linux (Ubuntu 18.04.1 LTS) setup with last realese of JLINK commander:
SEGGER J-Link Commander V6.32i (Compiled Jul 24 2018 15:20:49)
And when trying to connect to my board when choosing the wanted Device I type "?" to open the Device selection dialog, but nothing open. It goes directly to next step that is specify target interface.
Thank you for help
Log:
tleroy@tleroyVM:~$ JLinkExe
SEGGER J-Link Commander V6.32i (Compiled Jul 24 2018 15:20:49)
DLL version V6.32i, compiled Jul 24 2018 15:20:43
Connecting to J-Link via USB...O.K.
Firmware: J-Link EDU Mini V1 compiled Mar 29 2018 17:48:40
Hardware version: V1.00
S/N: 801003662
License(s): GDB, FlashBP
VTref=3.299V
Type "connect" to establish a target connection, '?' for help
J-Link>connect
Please specify device / core. <Default>: Unspecified
Type '?' for selection dialog
Device>?
Please specify target interface:
J) JTAG (Default)
S) SWD
F) FINE
I) ICSP
C) C2
TIF>s
Specify target interface speed [kHz]. <Default>: 4000 kHz
Speed>
No valid device has been selected.
J-Link>
I am currently working on a Linux (Ubuntu 18.04.1 LTS) setup with last realese of JLINK commander:
SEGGER J-Link Commander V6.32i (Compiled Jul 24 2018 15:20:49)
And when trying to connect to my board when choosing the wanted Device I type "?" to open the Device selection dialog, but nothing open. It goes directly to next step that is specify target interface.
Thank you for help
Log:
tleroy@tleroyVM:~$ JLinkExe
SEGGER J-Link Commander V6.32i (Compiled Jul 24 2018 15:20:49)
DLL version V6.32i, compiled Jul 24 2018 15:20:43
Connecting to J-Link via USB...O.K.
Firmware: J-Link EDU Mini V1 compiled Mar 29 2018 17:48:40
Hardware version: V1.00
S/N: 801003662
License(s): GDB, FlashBP
VTref=3.299V
Type "connect" to establish a target connection, '?' for help
J-Link>connect
Please specify device / core. <Default>: Unspecified
Type '?' for selection dialog
Device>?
Please specify target interface:
J) JTAG (Default)
S) SWD
F) FINE
I) ICSP
C) C2
TIF>s
Specify target interface speed [kHz]. <Default>: 4000 kHz
Speed>
No valid device has been selected.
J-Link>