Hi,
I'm receiving the error "PC of target system has unexpected value after erasing sector" while erasing external NOR FLASH S25FL127S (Cypress) connected to MCU LPC4357 (NXP) using J-Flash V6.32f. Earlier versions of J-Flash (V6.30 for example) the error message is preceded by a "Timeout" error.
The issue occurs when I try to "Erase Chip" after power on, around 4% , every time external Flash contains data. If I run "Erase Chip" again, the process continues smoothly.
Any idea of what could be wrong? I'm attaching the J-Flash logs.
Best Regards,
Alfredo
I'm receiving the error "PC of target system has unexpected value after erasing sector" while erasing external NOR FLASH S25FL127S (Cypress) connected to MCU LPC4357 (NXP) using J-Flash V6.32f. Earlier versions of J-Flash (V6.30 for example) the error message is preceded by a "Timeout" error.
The issue occurs when I try to "Erase Chip" after power on, around 4% , every time external Flash contains data. If I run "Erase Chip" again, the process continues smoothly.
Any idea of what could be wrong? I'm attaching the J-Flash logs.
Best Regards,
Alfredo
Best Regards,
Alfredo
Alfredo