[SOLVED] JFlash XMC 1200

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] JFlash XMC 1200

    Hi,

    We found a strange bevhaviour concerning the JFlash programm and the XMC 1200.

    We only can connect to the XMC 1200 with the JFlash Version 6.22d and the Flasher must be a Flasher ARM V4.00 with Firmwareversion "2017 Oct 6 16:42".
    With newer Version of JFlash or Firmware its not possible to connect, also with Flasher ARM V3.00 its not possible.

    However, once connected succesfully to the XMC 1200, its possible to connect with Flasher ARM V3.00 or different Versions of JFlash.

  • Hello,

    Thank you for your inquiry.
    Such an issue is not known to us.
    Are you using a eval board or custom hardware?
    Could you try a connect with J-Link Commander and post a screenshot of the output here?
    wiki.segger.com/J-Link_cannot_…ty_using_J-Link_Commander

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.