[SOLVED] J-Link Remote Server Unknown EMU command #28

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] J-Link Remote Server Unknown EMU command #28

    Hello,

    I'm using J-Link tools version 6.32c and trying to test the remote server function with a USB J-Link. I run remote server on one Windows 10 machine. I then launch J-Link Commander on the second Windows 10 machine within the same LAN.

    After executing a connect command I eventually receive a message box on Remote Server stating "Unknown EMU command #28 received. Discontinuing parsing of communication".

    Thank you for your help,
    Jim

    Below is a capture of the Commander console and error.


    Type "connect" to establish a target connection, '?' for help
    J-Link>connect
    Please specify device / core. : STM32F412RG
    Type '?' for selection dialog
    Device>
    Please specify target interface:
    J) JTAG (Default)
    S) SWD
    TIF>S
    Specify target interface speed [kHz]. : 4000 kHz
    Speed>
    Device "STM32F412RG" selected.


    Connecting to target via SWD
    Found SW-DP with ID 0x2BA01477
    Device will be unsecured now.
    Found SW-DP with ID 0x2BA01477
    Scanning AP map to find all available APs
    AP[1]: Stopped AP scan as end of AP map has been reached
    AP[0]: AHB-AP (IDR: 0x24770011)
    Iterating through AP map to find AHB-AP to use
    AP[0]: Core found
    AP[0]: AHB-AP ROM base: 0xE00FF000
    CPUID register: 0x410FC241. Implementer code: 0x41 (ARM)
    Found Cortex-M4 r0p1, Little endian.
    FPUnit: 15 code (BP) slots and 15 literal slots
    CoreSight components:
    ROMTbl[0] @ E00FF000

    ****** Error: Communication timed out: Requested 4 bytes, received 0 bytes !
    Cannot connect to target.
  • Hello,

    Thank you for your inquiry.
    The issue is already known and has been internally fixed.
    A fixed release is planned to be available in the next 1-2 weeks.

    To stay up to date with our J-Link software releases we suggest subscribing to our notification list:
    segger.com/notification/subscribe.php?prodid=7

    Best regards,
    Nino
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support contact us per e-mail.
    Alternatively our support ticketing system can be used as well: segger.com/ticket/