[ABANDONED] SES project + Amazon freertos + LPC54018 : Coprocessor hardfault

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] SES project + Amazon freertos + LPC54018 : Coprocessor hardfault


    I am using the project provided by Segger to run the amazon freertos on the LPC54018 with Embbedded studio.


    I can compile the project cleanly, but when debugging, the program stops because of a UsageFault_Coprocessor and report it is stopped by vector catch.

    It seems that the hard fault happens after the freertos scheduler start.

    I'm not sure how to debug this fault. Do you have any idea of what may happen ?

    Thank you,
  • Hello Yves,

    Thank you for your inquiry.
    Such an issue is not known to us.
    Did you edit anything in the project? It is configured to run out of the box.
    When changing settings make sure to follow the "Getting Started" from our AWS page step by step.

    Best regards,
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support contact us per e-mail.
    The following contact form can be used for this: Contact Us