Link problems with embOS 3.80i and MPLAB IDE 8.40 PIC18F4520

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Link problems with embOS 3.80i and MPLAB IDE 8.40 PIC18F4520

    1. embOS for PIC18 version 3.80i with MPLAB IDE 8.40 (embOS_PIC18_MPLAB_C18_Trial_V380i).
    2. PIC18F4520 CPU with Microchip PICDEM 2 PLUS demo board.
    I am trying to build an same app as shipped with trial package from segger.com (embOS_PIC18_MPLAB_C18_Trial_V380i.zip), but at the link stage I get an error message "Error - processor types do not agree across all input files". IMHO, the problem is that library objects compiled with another CPU (18F87J11) than I use (18F4520). Can I solve this problem?

    Sorry for my bad English - it's not a my native language.

  • Hi,

    no problem, It's also not my native language ;-).

    You cannot solve this by your own because you have tu build new libraries.

    Please contact me directly at support_embos@segger.com and I will build new libraries for you.
    This is not a big deal and I can do it once I have your email address in a few minutes.

    Regards,
    Til
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.