[SOLVED] Emulator selection popup

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Emulator selection popup

    Hi

    Is there a way to bypass the emulator selection popup? I'd like to have it selected automatically, the process of having the device manually selected is quite unhandy in my application.

    In J-Flash I tried selectig a certain USB Device in the project settings. I tried J-Link as well, using the usb <port> command but this leads to the same popup.
    Am I missing something here?
    Any help would be greatly appreciated.

    Regards,
    Markus

  • Hi Markus,


    all SEGGER J-Link software I am aware of comes with a command line option which can be used to specify the S/N of the J-Link to connect to.
    They are usually documented in UM08001.

    I tried J-Link as well, using the usb <port> command but this leads to the same popup.

    Are you referring to J-Link Commander? SelectEmuBySN is the command line option which selects an emulator connected via USB by its S/N.


    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.

  • Hi,


    thanks for the feedback and good to hear that you are up and running!


    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.