[ABANDONED] IMX6SOLOX AND JLINK DEBUGGING!

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] IMX6SOLOX AND JLINK DEBUGGING!

    I am able to detect the cortex M4 using J-Link and IAR EWARM 7.4.When i set a breakpoint,the control over the processor is lost.I am unable to reset it.

    Can you please provide a step by step instruction for debugging imx6solox using J-link regarding the settings(JTAG speed and CPU clock) to be given in IAR?
  • Hi,


    could you please take a quick look at this table and tell us which exact device you are using?
    wiki.segger.com/IMX_Series_Devices


    Instructions on how debugging i.MX6 SoloX device can be found here:
    wiki.segger.com/IMX6SX

    Does the provided example work for you?

    Best regards,
    Niklas
    Would you like to be added to the J-Link software update notification list, so you get informed automatically when a new version becomes available?
    Just write me a PM or in case you want to subscribe to it yourself, please use this link: Link
    Notification for J-Link, J-Link Debugger, SystemView & J-Scope: Link
    Notification for Embedded Studio: Link