[ABANDONED] IMX6SOLOX AND JLINK DEBUGGING!

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] IMX6SOLOX AND JLINK DEBUGGING!

    I am able to detect the cortex M4 using J-Link and IAR EWARM 7.4.When i set a breakpoint,the control over the processor is lost.I am unable to reset it.

    Can you please provide a step by step instruction for debugging imx6solox using J-link regarding the settings(JTAG speed and CPU clock) to be given in IAR?

  • Hi,


    could you please take a quick look at this table and tell us which exact device you are using?
    wiki.segger.com/IMX_Series_Devices


    Instructions on how debugging i.MX6 SoloX device can be found here:
    wiki.segger.com/IMX6SX

    Does the provided example work for you?

    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.